| Quantity: | |
|---|---|
1. Appearance: gray powder, no agglomeration, less moisture, particle size -80 mesh, high water solubility.
2. Functional acceptance criteria: small amount of addition, high initial ball formation rate after being pressed by a double-roller briquetting machine, strength: not broken when dropped to 2 meters.
1. Add dry powder to reduce the process.
2. Easy to use: You can mix it with other powders first and then add water to stir; you can also dissolve it in water to make a glue and then add other powders and stir;
3. Does not add any ash content, does not reduce calorific value, is not flame retardant (has a combustion-supporting effect); has strong adhesion, good molding effect, and uniform and beautiful appearance;
4. Green and environmentally friendly: the main raw material is cotton, and the combustion product is CO2, does not produce other harmful gases and impurities, does not affect product quality, and is environmentally friendly.
1. Add dry powder directly: Add the iron oxide scale adhesive evenly into the material. The ratio of material to adhesive is generally 100:1. The proportion can be adjusted appropriately according to factors such as the particle size and specific surface area of the material, as well as the amount of binder added. Before adding adhesive, wet the material first, spray an appropriate amount of water according to the humidity of the material, and pay attention to controlling the humidity. After stirring evenly, you can proceed with ball pressing.
2. Dissolve in water and form gel: Iron oxide scale adhesive has a certain viscosity after being dissolved in water. The correct dissolution method is to dissolve dry powder and water in a ratio of 1:30-50. First add a certain amount of water to the container, stir quickly with a stirring stick (or mixer), and at the same time add the powder slowly and evenly. Be careful not to form large clumps. Wait until the water is completely infiltrated into the powder, then stir evenly to form a colloid. Evenly mix the prepared colloid and other materials. After sufficient mixing and mixing, the materials will be sticky and the ball pressing operation can be carried out. When using iron oxide scale adhesive, you also need to pay attention to controlling the moisture content. If the material is too wet, it will easily cause sticking to the mold and reduce the balling rate. In addition, according to the specific conditions of the material, the amount of adhesive added and the mixing method can be appropriately adjusted to achieve a good ball pressing effect.
Popular tags: iron oxide pellet binder, steel mill iron oxide powder binder, oxide powder binder, iron oxide powder binder, iron oxide powder pellet binder, iron oxide powder pressure pellet binder , steel mill iron oxide scale ball pressure adhesive, steel mill iron oxide scale pellet binder, iron oxide scale pressure ball adhesive, iron oxide scale adhesive, manufacturer, customization, price, wholesale, China, ready stock
